CA004 Concealed Roof Anchor

This Anchor is designed to be bolted to timber structures but may just as easily be bolted to steel as required. The purpose of the removable eyebolt is to allow the Anchor to be concealed while not in use. This feature provides a clean roof line where protruding Anchors would detract from visual appearances. The location of the Anchor within the roof is distinguishable by the cap washer used to seal the eyebolt hole against weather ingress. The cap washer would be invisible from ground level but easily seen from on the roof.

Note:
ALL ANCHOR POINTS MUST BE POSITIONED IN THE CORRECT PLACE.

BEFORE DESIGNING ANY ANCHOR POINTS ONTO ANY BUILDINGS, YOU MUST FIRST CONTACT AN APPROVED AGENT AS TO THE CORRECT LOCATION OF THE ANCHORS.