Armourchlor HB-F

Product Description

Resene Armourchlor HB-F is a single pack high build chlorinated rubber finish coat providing outstanding resistance to corrosion in severe atmospheres, where it may be difficult or uneconomic to employ a two pack coating. These characteristics ensure maintenance free performance during many years' exposure in highly corrosive environments.

Typical uses:
- Breweries
- Bridges
- Chemical plants
- Galvanised iron
- General structural steelwork
- Marine structures
- Pulp and paper mills
- Roofs
- Ships
- Tank farms
- Towers.

Colour: White, MIOX, selected BS2660, BS5252 and Resene Total Colour System.

1. Inhibits mould growth.
2. May be applied over a wide range of temperatures -20º C to +50º C.
3. Excellent intercoat adhesion both initially and long-term.
4. Fast drying.
5. Highly impermeable films that minimise diffusion of oxygen and water to the substrate.

1. Solvent resistance – see above.
2. Not resistant to vegetable oils or animal fats.
3. Will soften at temperatures above 50ºC.
4. Will chalk upon exposure to U.V.
5. Not recommended for immersion (contact manufacturer for specific details).

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.