Armourcote 608

Product Description

Resene Armourcote 608 is a high gloss, fast dry spraying enamel based on a modified polyester resin. Durability, colour and gloss retention is typical of high quality gloss enamels.

Typical uses:
- Most suitably prepared exterior and interior surfaces. Colour: White, selected BS2660, BS5252 and Resene Total Colour System.

1. Fast drying.
2. May be applied over a variety of suitably prepared substrates.
3. An economical topcoat for improvement of the aesthetic appearance of epoxies in exterior situation.

1. Ensure correct primer is used.
2. Drying time can be affected by low temperature, high humidity and wet film thickness.
3. Ultimate harness, recoatability and solvent resistance develops over 7-10 days.
4. When applied over zinc rich primers a non-saponifable barrier coat must be applied.
5. Not recommended for prolonged or continuous immersion in fresh or saltwater.
6. Suitable for brush application on small areas only.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.