Product Description

Resene Walk-on is based on tough acrylic resins to give maximum abrasion resistance in a single pack satin finish. The surface finish of Resene Walk-on is designed to reduce the hazard of slipping. Add Resene SRG Grit for extra slip resistance.

Typical uses:
• Composite board
• Concrete
• Decking
• Fibre cement
• Particle board
• Steps
• Timber.

1. Excellent adhesion to new concrete and repaint work. 2. Satin finish tends to minimise the appearance of substrate defects.
3. Excellent colour retention.
4. Easy to apply.

1. Designed for foot traffic areas only. For garage floors use Resene Aquapoxy for Flooring (see Data Sheet RA43).
2. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
3. Not designed for use in severe environments, such as chemical plant or steel-wheeled traffic areas. For these circumstances, refer to the Resene Engineered Coating Systems Manual.
4. Areas coated with this product unmodified may not comply with New Zealand Building Code D1 3.3(d). Refer also to New Zealand Building Code D1 2.0 table 2. Use Resene SRG Grit or Resene Non-Skid Deck & Path (see Data Sheet) if a non-skid finish is required.