Uracryl 404
Product Description
Resene Uracryl 404 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oil. The most unusual feature of Resene Uracryl 404 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for durability and colour retention.
Colour: Clear, white, selected BS2660, BS5252, Resene Total Colour System and The Range.
Typical uses: As a long-life low sheen topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance:
- Aluminium
- Anti-graffiti
- Concrete/plaster
- Fibre cement
- Galvanised steel
- G.R.C. panels
- Paperfaced plasterboard (Super ToughZone)
- Repaints
- Structural steel.
Performance:
1. Enables use of high performance urethanes when spray application is likely to be difficult or undesirable.
2. Fast drying.
3. Positive curing even at low temperatures.
4. Low sheen topcoat over epoxy coatings where a low gloss finish and colour retention is paramount.
5. Acrylic modification imparts ready self recoating with minimal preparation, such as inorganic zinc silicates.
Limitations:
1. Not recommended as a tank lining.
2. In early stages of curing, film may be susceptible to mechanical damage.
3. Not recommended for direct application to zinc rich primers, such as inorganic zinc silicates.
4. Not recommended as a clear waterproofing system for concrete block and honed concrete block construction.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
