Timber and Furniture Gel

Product Description

Resene Timber and Furniture Gel is a non-drip, easy to apply, waterborne gel-stain designed for use on a wide variety of new and weathered timber surfaces, including furniture, both inside and out.

Colour: Jarrah Tree, Kwila, Sheer Black and Silvered Grey.

Typical uses:
- Timber furniture
- Timber planters
- Small decorative timber areas and features.

1. Enhances the natural grain of the timber while allowing it to show through.
2. Non-drip, low mess easy application.
3. Requires minimum surface preparation.
4. Contains powerful fungicides for mould resistance.
5. Timbers treated with this product will require application of maintenance coat/s to maintain colour and appearance. Maintenance interval will vary according to timber and exposure.
6. Fast dry and recoat. Limitations:
1. This product is designed to penetrate the surface with assistance from rubbing and any excess must be wiped off. Failure to do so could result in reduced weather stability and cracks may appear in the resulting film.
2. Will not kill existing mould. Use Resene Moss & Mould Killer (see Data Sheet D80).
3. Overcoating with varnishes is not recommended.
4. Do not apply over film forming stains.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.