StainLock
Product Description
Resene StainLock waterborne stain sealer is formulated to hold back a wide range of common surface stains to prevent them damaging subsequent topcoats. Designed for overcoating with your choice of Resene waterborne paint system. Ideal over stained areas where stain transmission is more likely.
Colour: White.
Typical uses:
- Brickwork
- Cementitious surfaces including concrete
- Concrete tiles
- Fibre cement
- Old stained surfaces
- Plaster, plasterboard and plasterboard compounds
- Timber.
Performance:
1. Blocks a variety of stains preventing bleed into topcoats. Severe stains may require two coats of Resene StainLock.
2. Suitable for blocking timber tannins for interior applications.
3. Suitable for both interior and exterior application (with an appropriate topcoat).
4. Excellent adhesion to existing coatings including suitably prepared aged alkyd paint.
5. Excellent flow and leveling.
6. An Environmental Choice approved product.
Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Will not block active stains, the source of the stain must be removed.
3. Not weather resistant as a standalone coating. Must be overcoated with durable waterborne topcoats.
4. Not recommended for green concrete, seal with Resene Limelock (see Data Sheet D809) before applying Resene StainLock.
5. Exterior exposed tannin rich timbers including cedar, which will cycle through wet and dry conditions, produce fresh stains. As StainLock cannot overcome active stains, Resene Wood Primer (see Data Sheet D40) is recommended to hold back staining when light colours are used over exterior exposed tannin rich timbers.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
