Broadwall 3 in 1

Product Description

Resene Broadwall 3 in 1 is designed for use over stopped and jointed wall systems in place of traditional surfacers and sealers. It equalises surface porosities; smoothes minor surface irregularities; minimises textural differences; and provides a perfect base for subsequent Resene finishes. A key element to achieving a level 5 finish on paperfaced plasterboard. Suitable for use as a surfacer, sealer and finish coat on ceilings in dry areas.

Typical uses:
- Air-dry (polymer based) stoppings and finishing compounds
- Gypsum based stoppings and finishing compounds
- Paperfaced plasterboard
- Timber, reconstituted timber products

Colour: White when dry. Performance:
1. Good adhesion to stoppings and finishing compounds.
2. Provides an excellent base for a wide range of Resene coatings.
3. Excellent sanding properties.
4. Replaces surfacer and sealer coats in dry areas.
5. May be tinted to light colours for use as a finish coat on ceilings in dry areas.
6. Easy application with excellent open time.
7. An Environmental Choice approved product.

1. Not designed to fill large gaps or cracks (use an appropriate stopping or finishing compound).
2. Not designed to block waterborne stains.
3. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
4. Resene Broadwall 3 in 1 is designed to be overcoated on broadwall areas.
5. Not recommended for exterior use.
6. Must be sealed in wet areas before topcoating.
7. In critical lighting situations imperfections in board installation and stopping may not be totally overcome.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.