Polymeric AV-8
Product Description
Resene Polymeric AV-8 is a single pack high-build vinyl topcoat providing outstanding resistance to corrosion in severe atmospheres. Contains an acrylic reinforcement to provide superior gloss and colour retention. These characteristics ensure maintenance-free performance over many years exposure in highly corrosive environments. Colour: White, selected BS2660, BS5252 and Resene Total Colour System.
Typical uses:
- Bridges
- Chemical plants
- Concrete
- Containers
- Galvanised iron
- General structural steelwork
- Marine structures
- Pulp and paper mills
- Roofs
- Ships
- Tank farms
- Towers.
Performance:
1. Inhibits mould growth.
2. May be applied over a wide range of temperatures -20ºC to +50ºC.
3. Excellent intercoat adhesion both initially and long-term.
4. Dries quickly by solvent evaporation.
5. Forms highly impermeable films that minimise diffusion of oxygen, water etc. to the substrate.
6. Forms flexible films and is easily repaired.
7. Will chalk after exterior exposure. Degree of chalking will depend upon nature and length of exposure.
Limitations:
1. Solvent resistance – see above. Not resistant to solvents, vegetable oils or animal fats.
2. Will soften at temperatures above 50º.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
