Particle Board Sealer
Product Description
Resene Particle Board Sealer is a unique product designed for use under clear alkyd and polyurethane varnishes. Seals in all fibres and waxes used in the manufacture of such boards as fibre and particle board.
Colour: Clear.
Typical uses:
- Where a solventborne or polyurethane finish is required over HDF and MDF.
Performance:
1. Seals in the wax often found on the surface of particle board. Waxes may inhibit the drying of clear alkyd and polyurethane varnishes.
2. May be overcoated with Resene Qristal Clear Polyurethane, Resene Poly-Flat, Resene Poly-Satin and Resene Poly-Gloss (see Data Sheet D52).
3. May be overcoated with Resene Polythane for a hardwearing floor finish (see Data Sheet D53).
Limitations:
1. Resene Particle Board Sealer must be overcoated.
2. Not recommended for exterior use.
3. The quoted coverage is applicable to smooth surfaced boards. Rough surfaces will demand more product.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
