Enamacryl Metallic
Product Description
Resene Enamacryl Metallic is a breakthrough product that may be used in all those areas traditionally reserved for solventborne enamels to achieve a metallic effect.
Typical uses:
• Architraves
• Bathrooms
• Furniture
• Kitchens
• Laundries
• Plywood
• Skirtings
• Timber doors
• Wallboards
• Window frames
Colour: A range of metallic effects from the Resene Metallic and special effects colour chart.
Performance:
1. Clean, spatter free application.
2. Available in a range of metallic colours that cannot be matched by standard decorative paint offerings.
3. An Environmental Choice approved product.
Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Ensure the correct primers and/or sealers are used.
3. Due to waxes used in fibre and particle board it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat on these substrates.
4. Do not apply over fresh concrete.
5. Demands good application.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
