Armourchlor HB-P

Product Description

Resene Armourchlor HB-P is a vinyl based anti-corrosive primer for direct application to suitably prepared steel or an intermediate coat over zinc rich primers or galvanising. The coating has a very high degree of impermeability and although blast cleaning must always remain the preferred method of surface preparation it will give superior performance over power or hand cleaned steel.

Typical uses:
- Bridges
- Chemical plants
- Cranes
- Galvanised iron
- General structural steelwork
- Marine structures
- Roofs
- Ships
- Tank farms
- Towers

Colour: Blue.

1. May be applied over a wide range of temperatures -20º C to +50º C.
2. Excellent intercoat adhesion both initially and long-term.
3. Fast drying.
4. Intermediate coat over galvanising or zinc rich primers, such as Resene Zincilate 10/11 (see Data Sheet RA20/RA21) or Resene ArmourZinc 110 (see Data Sheet RA23).

1. Solvent resistance – see above.
2. Not resistant to vegetable oils or animal fats.
3. Will soften at temperatures above 50ºC.
4. Heavy film thicknesses require extended drying prior to overcoating with alkyds, acrylics or Resene Polymeric AV-8 (see Data Sheet RA63).
5. Overcoat with acrylics, alkyds, chlorinated rubbers and vinyls (light topcoat colours to be used irrespective of topcoat type).
6. Not recommended for total immersion service.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.