Zylone 20

Resene Zylone 20 is a unique combination of resins and pigments producing a dead flat film. Its ease of application and durability makes it an ideal choice for modern interior decor. A very low odour product.

Colour: White and colours off-white.

Typical uses:
- Block and brickwork
- Concrete
- Fibre and particle board
- Paperfaced plasterboard
- Plaster glass
- Solid plaster
- Wallboards.

Performance:
1. Excellent flow properties drying to a luxurious suede finish.
2. Burnish resistant.
3. Clean, spatter free application.
4. Washability improves over several days as the paint hardens.
5. An Environmental Choice approved product.

Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Not recommended for use in bathrooms, kitchens or laundries.
3. Will not penetrate chalky and powdery surfaces.
4. Not normally used on opening sashes and doors (use Resene SpaceCote Low Sheen - see Data Sheet D311).
5. In high traffic areas a higher sheen finish from the Resene range, such as Resene SpaceCote Low Sheen (see Data Sheet D311), may be preferred.
6. Initial gloss level of ‘touch-up’ or thicker areas may be higher than surrounding paint. The final flat finish will develop over several days.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.