Zincilate 10
Product Description
Resene Zincilate 10 is a sacrificial two pack priming system for steel, having outstanding anti-corrosive properties. May be applied in conditions up to 95% relative humidity. Eliminates rust undercutting. Excellent resistance to abrasion and impact damage.
Colour: Grey.
Typical uses:
- As a primer/finish coat
- As a permanent primer for organic topcoats such as chlorinated rubbers, epoxies, urethanes or vinyls
- Pipelines or storage tanks for petro-chemical refining
- Pulp and paper plants
- Structural steel
- Widely used as tanklining for petroleum solvents.
Performance:
1. Gives the best known long-term corrosion protection to steel.
2. Unsurpassed solvent resistance.
3. Excellent resistance to abrasion and impact damage.
4. Provides excellent protection to steel without the necessity for overcoating.
5. May be applied under cold, damp conditions.
Limitations:
1. Before topcoating check that the film is cured by testing resistance to rubbing with a rag wrung out in Resene Thinner No.12.
2. Ensure surface is clean, dry and free from soluble salts before overcoating.
3. Coating will not cure at R.H. lower than 40% - undercured coatings may be cured by keeping damp with water spray after the film has set.
4. Sensitive to acid or alkali solutions.
5. Not to be used as lining for storage tanks containing jet fuels.
6. Not suitable for total immersion in water.
7. Non-saponifiable barrier coat must be used when overcoating with solventborne systems.
8. Not suitable for brush/roller application.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
