Squash Court Coating

Resene Squash Court Coating is a two pack waterborne epoxy especially developed for coating squash court walls.

Colour: Off-white (similar to BS2660-4046), limited range of pastel colours.

Typical uses: Concrete/plaster walls.

Performance:
1. High surface hardness with excellent resistance to abrasion. 2. Displays unsurpassed adhesion to appropriately prepared surface. 3. Excellent resistance to chemical solvents and water. Marked walls may be cleaned down with Resene Graffiti Cleaner (see Data Sheet RA101).
4. Waterborne formulation overcomes problems associated with use of solventborne products in areas of restricted ventilation.
5. Formulated for brush, roller or airless spray application.
6. Tolerant of application over damp surfaces.

Limitations:
1. Application not recommended at temperatures below 10°C or above a R.H. of 85% as cure time in considerably slowed.
2. Allow system to cure for a minimum of 48 hours before court is recommissioned. At lower temperatures this interval may need extending to avoid damaging coatings. Full cure will take up to five days.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.