SpaceCote Flat CoolColour
Product Description
Resene SpaceCote Flat is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up.
Colour: Selected Resene Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals and The Range.
Typical uses:
- Block and brickwork
- Concrete
- Fibre cement
- G.R.C. panels
- Primed timber
- Solid plaster.
Performance:
1. Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure.
2. Flat finish minimises the appearance of minor surface defects.
3. Very durable, abrasion resistant finish that can be easily cleaned. Ideal for GIB® ToughZone areas.
4. Non-yellowing.
5. May be used wherever solventborne enamels have traditionally been used.
6. Resene SpaceCote Flat may be applied over Resene Quick Dry (see Data Sheet D45) or directly over sound, clean old enamel surfaces.
7. Clean, spatter free application.
8. An Environmental Choice approved product.
Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Ensure the correct primers and/or sealers are used.
3. Due to waxes used in fibre and particle board it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat on these substrates.
4. Although serviceable within 12-48 hours, full print and solvent resistance takes 30 days to develop.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
