Fireguard
Product Description
Resene Fireguard is an intumescent coating designed to improve the early fire hazard of various inflammable substrates. Designed to provide this protective effect while maintaining the ease of application and aesthetic appeal of a good quality decorative coating.
Typical uses: Any surface where the early fire hazard needs upgrading.
Performance: Resene Fireguard has been tested over 12mm particleboard, customwood and hardboard (<12mm) and has early fire hazard ratings over these substrates. Resene Fireguard is not normally needed for Group 3 and 4 substrates.
Colour: White.
Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Not recommended for damp areas.
3. Early fire hazard ratings only apply if Resene Fireguard is applied over correctly primed new substrates at the appropriate specified spreading rates as in the test reports.
4. Particle board that uses Cedar in its furnish may produce unacceptable spot staining.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
