Epox-O-Bond
Product Description
Resene Epox-O-Bond is a two component epoxy filler or surfacing compound with excellent non-sag and gap-filling qualities. Adheres to a wide range of materials but is not designed for flexible materials and certain plastics.
Typical uses:
- Concrete
- Fibre cement
- GRP
- Timber.
Colour: Green.
Performance:
1. Excellent adhesion to a wide variety of substrates.
2. Does not shrink after curing.
3. May be sanded to a smooth, dense, non-porous surface.
4. May be applied up to 10mm thick on vertical surfaces without slumping.
Limitations:
1. Curing is affected by low temperatures and high humidity. The temperature of the substrate should be 3°C above the dew point.
2. Not designed for use on flexible materials, certain plastics or to fill joints where movement is likely to occur.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
