Enamacryl CoolColour

Resene Enamacryl CoolColour is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing, fast drying and has much lower odour than solventborne counterparts. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up.

Colour: Selected colours from the Resene Total Colour System.

Typical uses:
- Window and door trim, panels and joinery.

Performance:
1. Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure.
2. May be used wherever solventborne enamels have traditionally been used.
3. Non-yellowing.
4. Resene Enamacryl may be applied over Resene Quick Dry (see Data Sheet D45) or directly over sound, clean old enamel surfaces.
5. Clean, spatter free application.
6. An Environmental Choice and Good Environmental Choice approved product.

Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Ensure the correct primers and/or sealers are used.
3. Due to waxes used in particle and fibre board it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat.

Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.

Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.

Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.