Concrete Primer
Product Description
Resene Concrete Primer is designed for cementitious surfaces, including all concrete, plaster and surfaces, such as fibre cement to make ready for topcoating. Provides long-term adhesion coupled with exceptional durability even when left uncoated for prolonged periods.
Typical uses:
- Brick and blockwork
- Cementitious surfaces
- Fibre cement
- Formed concrete
- Plaster
- Precast panels
- Tilt slab
Colour: Grey
Performance:
1. Excellent adhesion.
2. Outstanding durability.
3. Excellent flow and sanding properties.
4. Designed with a low sheen that allows exceptional topcoat hold-out.
5. An Environmental Choice approved product.
Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Not designed as a first coat over weak powdery cementitious surfaces or surfaces where salt staining is likely – use Resene Sureseal (see Data Sheet D42).
3. Where there is a risk of lime staining on fresh plaster, use Resene Limelock (see Data Sheet D809).
4. Not recommended for use where severe water staining exists.
5. Resene Concrete Primer is not recommended over sealants. Best elastomeric sealant performance is achieved by leaving it unpainted.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
