Name: CANTAC HSE-TAC Canister Clear 13.6kg NON-TOXIC
Brand: Glue Guru

Back

Product Description

HSE-TAC is a premium low odour, high strength, high heat resistant contact spray adhesive with an extra-long working time formulated specifically for bonding Polyester wall coverings, acoustic and thermal insulation of all types, office partitions, High Pressure Laminates (HPL) to MDF, particleboard and plywood.

HSE-TAC contains no toxic methylene chloride commonly present in competing products so it's much safer to use.

HSE-TAC is an excellent choice for applications requiring extended working times, high strength bonds, and a minimal odour. HSE-TAC is very versatile and is considered one of the flagship products within the CANTAC family of products. HSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.

HSE-TAC is sprayed through Cantac brand Guns & Hoses (Sold separately) - Click here to view.

COMMON USES

Bonds Polyester Wall & Floor Coverings
Bonds High Pressure Laminates (HPL)
Radius Edge Banding
Furniture & Upholstery
Automotive & Marine Headliners
Bonds a Variety of Carpets
Bonds Acoustic & Sound Deadening Materials

BONDS
HSE-TAC will effectively bond Polyester Wall & Floor Coverings, High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, fiberglass, most plastics and many other materials.

ADVANTAGES

Extra Long Open Time
Very Low Odour
High Heat Resistant
High Strength
Waterproof
No Ozone Depleting Substances
High Coverage
High Solids

PREPARATION
For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.

TECHNICAL DETAILS

Chemical Description: Solvent Based Contact Adhesive
Solids Content: 27 - 31%
Viscosity: Sprayable Grade
Minimum Open Time: 2 - 5 minutes
Maximum Open Time: 24 hours (best results within 1hr)
Heat Resistance: -40 – +120ºC
Cleaner: Citrus Cleaner or Acetone
Flash Point: Extremely Flammable
Specific Density: 0.70kg per ltr +/- 5%

APPLICATION METHOD

Sprayed through CANTAC brand Guns & Hoses (Sold separately) - Click here to view

APPEARANCE

Clear Sprayable Liquid

ODOUR

Minimal Solvent Odour

CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.

LIMITATIONS
HSE-TAC is not recommended for use on Polystyrene. HSE-TAC is not recommended for Vinyl Flooring.

TESTING
Always test the suitability of the product for your application before use.

COVERAGE
15m2 per kg Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).

SIZES