Name: CANTAC HIGH-TAC Canister Clear 17kg
Brand: Glue Guru

Back

Product Description

HIGH-TAC is sprayed through Cantac brand Guns & Hoses (Sold separately) - Click here to view.

COMMON USES

Bonds High Pressure Laminates (HPL)
Radius Edge Banding
Bonds Foam to Foam
Furniture & Upholstery
Automotive & Marine Headliners
Wall & Floor Coverings

BONDS
HIGH-TAC will effectively bond High Pressure Laminates (HPL), MDF, particleboard and plywood, urethane foam, FRP, carpet, felt, fabrics, paper products, duct insulation, steel, aluminium, concrete, moulded fiberglass, most plastics and many other materials.

ADVANTAGES

High Heat Resistant
High Strength
Fast Tacking
Non-Flammable
Waterproof
No Ozone Depleting Substances
Low Odour
High Coverage
High Solids

PREPARATION
For best results all surfaces to be bonded must be clean, dry and free from dirt, dust, oil, loose paint, wax and grease. The temperature of the adhesive and the surfaces being bonded should ideally be between 15°C - 27°C.

TECHNICAL DETAILS

Chemical Description: Solvent Based Contact Adhesive
Solids Content: 32 - 36%
Viscosity: Sprayable Grade
Minimum Open Time: 1 - 3 minutes
Maximum Open Time: 2 hours (best results within 1hr)
Heat Resistance: -40 – +120ºC
Cleaner: Citrus Cleaner or Acetone
Flash Point: Non detected
Specific Density: 1.20kg per ltr +/- 5%

APPLICATION METHOD
Sprayed through CANTAC brand Guns & Hoses (Sold separately) - Click here to view

APPEARANCE

Clear Sprayable Liquid

ODOUR
Minimal Solvent Odour

CLEAN UP
Clean tip after use with CANTAC Citrus Cleaner. Excess adhesive and overspray may be removed with CANTAC Citrus Cleaner, Acetone, WOODLOK GLAZE-AWAY & DSOLV-AWAY, GLUE GURU 05CR or most Industrial Solvents.

LIMITATIONS
HIGH-TAC is not recommended for use on Polystyrene. HIGH-TAC is not recommended for Vinyl Flooring.

TESTING
Always test the suitability of the product for your application before use.

COVERAGE
15m2 per canister Single Sided (Guide only. Coverage depends on absorbency of surface and coating weight).

SIZES