ArmourZinc 125
Product Description
Resene ArmourZinc 125 is a two-pack, inorganic hybrid, zinc rich primer. Base primer for high performance protective coating systems for steel structures in demanding environments. Fast dry-to-recoat increases through-put of multi-coat systems. Unique rheology allows defect-free films to be readily produced. Cures to a dense film with minimal pinholing when overcoated.
Typical uses:
- General purpose primer for a variety of high performance coating systems to protect steel structures against corrosion.
Colour: Grey.
Performance:
1. Primer for long-term corrosion protection for mild steel in conjunction with a suitable topcoat system.
2. Ease of application.
3. Minimal pinholing when topcoating.
4. Fast topcoat potential.
5. Good low temperature cure properties.
Limitations:
1. Not suitable as a tank lining for containment of chemicals or solvents.
2. Overcoating systems must be non-saponifiable.
3. Must not be allowed to come into direct contact with acid or alkaline solutions outside pH range indicated above.
4. Will chalk when exposed to direct sunlight.
5. Must be topcoated with an appropriate topcoat system for long-term corrosion protection in environments with medium to high corrosivity classification.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
