ArmourZinc 120
Product Description
Resene ArmourZinc 120 is a tough, abrasion resistant film that bonds strongly to steel, inorganic zinc and existing epoxy surfaces. Zinc content of the coating gives steel cathodic protection if the film is damaged. Rapid drying and topcoating allows for early handling of steel when used as shop primer or on site applications.
Typical uses:
- Fertiliser plants
- Gas plants
- Hydro-electric installations
- Marine
- Oil refineries
- Petro-chemical plants
- Power plants
- Preconstruction or touch-up primer for inorganic zinc
- Pulp and paper mills
- Tanklining (when suitably topcoated) for mineral oils, aromatic/aliphatic solvents, vegetable oils.
Colour: Grey/green.
Performance:
1. More tolerant of imperfect surface preparation than inorganic zinc silicates.
2. Will cure satisfactorily at low humidities and in windy conditions.
3. Suitable for repair of welded joints on zinc coated surfaces where abrasive blasting is precluded.
4. Fast topcoat potential.
Limitations:
1. If air or surface temperatures exceed 35°C at application consult manufacturer for thinning recommendations.
2. Full curing, air and surface temperatures must be above 10°C.
3. Must not be allowed to come into contact with acid or alkaline solutions outside pH range indicated above.
4. Overcoating systems must be non-saponifiable.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
