Armourcote 210
Product Description
Resene Armourcote 210 is a single-pack, high-build inhibitive primer for general industrial and non-immersion marine use. Suitable for overcoating with a wide range of protective and decorative topcoat systems.
Typical uses:
- Aluminium
- Galvanised steel
- Repaints
- Structural steel
Colour: Red oxide, grey
Performance:
1. Chromate free.
2. Single pack convenience.
3. High build capability.
4. May be topcoated with epoxies, polyurethanes, vinyls, alkyds and acrylics. To avoid adhesion issues early topcoating is recommended.
5. Fast drying with early topcoating potential.
Limitations:
1. When applying over an existing coating a test patch should be carried out to check adhesion to, and compatibility with, the existing coating.
2. Spray application of topcoats is recommended for early topcoating.
3. Not designed for long-term exterior exposure without topcoating. Consult manufacturer for advice when recoating beyond six months exterior exposure.
4. Not recommended for total immersion service.
5. Adhesion of alkyd finishes may vary according to topcoat formulation. Establish adhesion properties of the system by application of a test area.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
