Aquaclear
Product Description
Resene Aquaclear has been developed as a waterborne alternative to turps thinned oil modified urethanes to enhance and protect timber. Where maximum abrasion resistance is required, such as high traffic floors, a moisture-cured urethane, such as Resene Polythane (see Data Sheet D53), is recommended.
Typical uses:
- Cork
- Desks
- Doors
- Fibre and particle board
- Furniture
- Panelling
- Parquet
- Skirtings
- Solid timber
- Veneers
Colour: Clear.
Performance:
1. Low odour application and drying.
2. Water wash up.
3. Easy recoating.
4. An Environmental Choice approved product.
Limitations:
1. Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
2. Dries very quickly at high temperatures and low humidity. Maintain a wet edge.
3. Not recommended for high abrasion areas.
4. Allow 72 hours for coating to reach full cure.
Please ensure the current Data Sheet and Safety Data Sheet are consulted prior to specification or application of product. If in doubt contact Resene. Enjoy the Resene Promise of Quality Guarantee on Resene decorative coatings - see Resene for more information.
Resene decorative coatings are tinted using unique Resene non VOC tinters enabling you to achieve the desired colour without added VOCs.
Engineered Systems Coatings products are tinted using special Resene industrial tinters. Remember Resene can create a customised specification free for your project - contact us for more information. Order colour charts and drawdowns of Resene colours from the Resene website.
